No luck, Ricardo :(
Ricardo Tavares wrote:
Try something like:
=================================================
set system syslog file Special-Events daemon info
set system syslog file Special-Events match "(.*EVENT
UpDown.*->.*)|(.*bgp.*)|(.*LDP.*)|(.*OSPF.*);"
=================================================
so you can do:
show log Special-Events
or
monitor start Special-Events
Regards,
Ricardo
On Mon, Dec 1, 2008 at 8:46 PM, a. rahman isnaini rst / netsoft
<[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:
Hi,
To generate log like cisco "sh logging" using access-list, i have
configured :
- Firewall>Family Inet>Filter "log">Match all then log
- Interface>Unit x> Family Inet> input filter "log"
- System>Services>Syslog>all facilities [any]
All I've seen by "show log messages" is just simply standard log
(somebody is login, etc..).
And as well, "show firewall log", it match the "log" but only shows
Point to Point session.
Any simple way to have log such cisco did ? please kindly advice.
rgs
a. r.isnaini rangkayo sutan
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
<mailto:juniper-nsp@puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
__________________________________________
Vai Encarar? http://www.vaiencarar.com.br
------------------------------------------------------------------------
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.2/1187 - Release Date: 12/16/2007 11:36 AM
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
