Bjorn Tore Paulen <b...@paulen.net> writes: > RIPE is eager to know the number of IPs I use at a given time. I can graph > percent of pool (MRTG -> juniDhcpLocalServerPoolUtilPct), but it seems that > the OID I want isn't supported. Could this be a version issue? I run 8.2.3. > > Regarding http://www.oidview.com/mibs/4874/Juniper-DHCP-MIB.html the OID I'd > want probably is > juniDhcpLocalServerPoolInUse (1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.19)
How about using juniAddressPoolInUse from http://www.oidview.com/mibs/4874/Juniper-ADDRESS-POOL-MIB.html instead? we don't use dhcp local server, but I assume the results will be the same as for ppp: bj...@server:~$ snmpwalk -v2c -c comm router .1.3.6.1.4.1.4874.2.2.21.1.1.1.1 Juniper-ADDRESS-POOL-MIB::juniAddressPoolRowStatus.1 = INTEGER: active(1) Juniper-ADDRESS-POOL-MIB::juniAddressPoolName.1 = STRING: "adsl" Juniper-ADDRESS-POOL-MIB::juniAddressPoolStart.1 = IpAddress: 0.0.0.0 Juniper-ADDRESS-POOL-MIB::juniAddressPoolEnd.1 = IpAddress: 0.0.0.0 Juniper-ADDRESS-POOL-MIB::juniAddressPoolSize.1 = INTEGER: 3574 Juniper-ADDRESS-POOL-MIB::juniAddressPoolInUse.1 = INTEGER: 2213 Juniper-ADDRESS-POOL-MIB::juniAddressPoolHighUtilThreshold.1 = INTEGER: 85 Juniper-ADDRESS-POOL-MIB::juniAddressPoolAbatedUtilThreshold.1 = INTEGER: 75 Juniper-ADDRESS-POOL-MIB::juniAddressPoolUtilPct.1 = INTEGER: 61 Juniper-ADDRESS-POOL-MIB::juniAddressPoolTrapEnable.1 = INTEGER: false(2) Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex.1 = INTEGER: 0 Bjørn _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp