On Tue, Jan 13, 2009 at 02:43:51PM +0100, Bjørn Mork wrote: > How about using juniAddressPoolInUse from > http://www.oidview.com/mibs/4874/Juniper-ADDRESS-POOL-MIB.html > instead?
According to the MIB itself, this MIB is deprecated. Also, it reports reports only the 'first' pool. It definetely reports all pools on my router, but this text may indicate that it will not be supported in the future. juniAddressPoolInUse OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of addresses currently allocated from the 'first' pool profile entry. This object is deprecated in favor of juniAddressPoolProfileInUse because it applies to a single address range and can only show one of possibly many address ranges found in the newer juniAddressPoolProfileTable. The value in this table maps to the value in the juniAddressPoolProfileTable for the entry with juniAddressPoolProfileIndex equal to 1." ::= { juniAddressPoolEntry 7 } Kari _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp