<<just configure RSVP or LDP on <<<the PEs so that LSPs can be automatically established by VPLS?
RSVP or LDP should be just fine. -Ashok -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Simon Chen Sent: Thursday, August 06, 2009 12:09 PM To: Harry Reynolds Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] lsp required for vpls? Thank you all for the reply. Do I need to explicitly configure MPLS LSPs between the PEs (using protocols/mpls/label-swithing-path)? Or just configure RSVP or LDP on the PEs so that LSPs can be automatically established by VPLS? Thanks. -Simon On Thu, Aug 6, 2009 at 1:12 PM, Harry Reynolds<ha...@juniper.net> wrote: > Ldp can both signal vpls (ldp based vpls control plane) and establish lsps. You either single vpls with ldp or bgp, and then transport via a lsp between pes. This transport lsp can be rsvp or ldp signaled. > > Regards > > > > -----Original Message----- > From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Simon Chen > Sent: Thursday, August 06, 2009 9:35 AM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] lsp required for vpls? > > Hi all, > > I read in the VPN configuration guide that LSPs between PEs are required for VPLS. However, I am able to establish a VPLS setup using LDP signalling, but without MPLS-LSP between PEs. > > Does anyone know why? My guess is that LSP is only required if you're going for the BGP signalling, but not required if you're doing LDP. > Can anyone clarify this? > > Thanks. > -Simon > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp