Bill, Bill Blackford schrieb: > That makes sense. I'm not at all happy with it, but it makes sense. I'm am > using ge-0/1/0 which must correspond to ge-0/0/20. > > Thanks. > > -b > > -----Original Message----- > From: Mike Mainer [mailto:mmai...@tekinside.com] > Sent: Monday, August 17, 2009 7:39 AM > To: Bill Blackford > Subject: Re: [j-nsp] EX3200 Interface Strangeness > > The 3200 is setup so that if an uplink Mod is installed you loose the > last X ports. Example: you have a 24x10/100/1000 with 4x1GigE card. > If/when ports are active on this 4x1GigE card ports 20-23 become > INACTIVE. They are mutely exclusive.
would you mind trying to configure the SFP uplink module to 2x10GE operation and have a look, if this too steals ports? Or has anybody done this already? Kind regards, Malte -- Malte v. dem Hagen Teamleitung Network Engineering & Operation Abteilung Technik ----------------------------------------------------------------------- Host Europe GmbH - http://www.hosteurope.de Welserstraße 14 - 51149 Köln - Germany Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*) HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678 Geschäftsführer: Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller (*) 0,14 EUR/Min. aus dem dt. Festnetz, Mobilfunkpreise ggf. abweichend
signature.asc
Description: OpenPGP digital signature
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp