Hey folks.
I'm cross posting this so apologies if you are both lists. Trying to get a LAG group up between a Juniper EX4200 switch and a Cisco 7606 using a pair of GigE's - rush job etc.. can't get the group to come up and missing something obvious ;) Cisco: interface GigabitEthernet3/25 description ---------- switchport switchport access vlan 56 switchport mode access no cdp enable channel-protocol lacp channel-group 2 mode active interface GigabitEthernet3/37 description -------------- switchport switchport access vlan 56 switchport mode access no cdp enable channel-protocol lacp channel-group 2 mode active interface Port-channel2 description -------------- switchport switchport access vlan 56 switchport mode access end Juniper Side: ge-0/0/35 { description xxxxx-1; ether-options { 802.3ad ae0; } ge-0/0/47 { description xxxxxx-2; ether-options { 802.3ad ae0; } ae0 { aggregated-ether-options { minimum-links 1; link-speed 1g; lacp { passive; } } unit 0 { family ethernet-switching { port-mode access; vlan { members xxxxxx; } } } _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp