Hi Paul, You may need to add the following to the main config stanza:
chassis { aggregated-devices { ethernet { device-count 1; /* Or as many groups as you need */ } } } main confg stanza: vlans { SOME-VLAN { vlan-id 700; interface { ae0.0; } } } interfaces stanza: ae0 { aggregated-ether-options { no-flow-control; minimum-links 1; link-speed 1g; lacp { active; /* I suggest active lacp discussions */ } } unit 0 { family ethernet-switching { port-mode access; } } } - Chris. On 2010-02-12, at 10:11 AM, Paul Stewart wrote: > Hey folks. > > > > I'm cross posting this so apologies if you are both lists. > > > > Trying to get a LAG group up between a Juniper EX4200 switch and a Cisco > 7606 using a pair of GigE's - rush job etc.. can't get the group to come up > and missing something obvious ;) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp