First off, sorry for such a long email. But I figured I would give as much information as possible upfront to try and give a clear picture about what I have and what I am currently running.
Central Office Equipment: Juniper M20 running v7.5R1.12 1x Link Services module (ls-3/0/0) Customer Equipment: Cisco 2611 running c2600-ipbase-mz.124-23 2x Eth (e0/0, e0/1) 4x T1 wic (s0/0, s0/1, s1/0, s1/1) The following is the important parts of the config of the Cisco router interface MFR0 description my interface no ip address frame-relay lmi-type ansi frame-relay intf-type dce interface MFR0.16 point-to-point ip address 66.39.177.130 255.255.255.252 no cdp enable frame-relay interface-dlci 16 IETF interface MFR1 description Loop2 no ip address load-interval 30 frame-relay lmi-type ansi interface MFR1.16 point-to-point ip address 66.39.177.126 255.255.255.252 no cdp enable frame-relay interface-dlci 16 IETF interface Ethernet0/0 ip address 66.39.177.133 255.255.255.252 half-duplex interface Serial0/0 no ip address encapsulation frame-relay MFR0 no arp frame-relay interface Serial0/1 no ip address encapsulation frame-relay MFR1 no arp frame-relay If I place a cross over cable connecting S0/0 and S0/1, all the links come up. So I am pretty sure that I have it all configured correctly. I think the problem is with my Juniper setup, hence the reason I am posting this here. Here is my Juniper config: > show configuration chassis fpc 3 pic 0 mlfr-uni-nni-bundles 32; > show configuration interfaces t1-1/1/0:0 description "Bendtel Test leg #1"; encapsulation multilink-frame-relay-uni-nni; lmi { lmi-type ansi; } unit 0 { family mlfr-uni-nni { bundle ls-3/0/0:0; } } > show configuration interfaces t1-1/0/0:19 description "Bendtel Test leg #2"; encapsulation multilink-frame-relay-uni-nni; lmi { lmi-type ansi; } unit 0 { family mlfr-uni-nni { bundle ls-3/0/0:0; } } > show configuration interfaces ls-3/0/0:0 dce; encapsulation multilink-frame-relay-uni-nni; unit 16 { dlci 16; family inet { address 66.39.177.129/30; } } unit 17 { dlci 17; family inet { address 10.100.100.1/30; } } Here is the current status of all these interfaces > show interfaces ls-3/0/0:0 Physical interface: ls-3/0/0:0, Enabled, Physical link is Down Interface index: 349, SNMP ifIndex: 953 Link-level type: Multilink-FR-UNI-NNI, MTU: 1508 Device flags : Present Running Interface flags: Hardware-Down Link-Layer-Down Point-To-Point SNMP-Traps Last flapped : 2010-08-13 19:39:56 GMT (6d 20:20 ago) Multilink Frame Relay UNI NNI bundle options: Device type DCE MRRU 1508 Fragmentation threshold 0 Red differential delay limit 10 Yellow differential delay limit 6 Red differential delay action Remove link Reassembly drop timer 0 Links needed to sustain bundle 1 LIP Hello timer 10 Acknowledgement timer 4 Acknowledgement retries 2 Bundle class A LMI type ANSI T391 LIV polling timer 10 T392 polling verification timer 15 N391 full status polling count 6 N392 error threshold 3 N393 monitored event count 4 Input rate : 0 bps (0 pps) Output rate : 0 bps (0 pps) Multilink Frame Relay UNI NNI bundle statistics: Frames fps Bytes bps Fragments: Input : 0 0 0 0 Output: 0 0 0 0 Packets: Input : 0 0 0 0 Output: 0 0 0 0 Multilink Frame Relay UNI NNI bundle links information: Active bundle links 0 Removed bundle links 2 Disabled bundle links 0 Multilink Frame Relay UNI NNI active bundle links statistics: Frames fps Bytes bps t1-1/0/0:19.0 <-- down Input : 0 0 0 0 Output: 0 0 0 0 Current differential delay 0.0 ms Recent high differential delay 0.0 ms Times over red diff delay 0 Times over yellow diff delay 0 LIP:add_lnk lnk_ack lnk_rej hello hel_ack lnk_rem rem_ack Rcv: 0 0 0 0 0 0 0 Xmt: 15 0 0 0 0 0 0 t1-1/1/0:0.0 <-- down Input : 0 0 0 0 Output: 0 0 0 0 Current differential delay 0.0 ms Recent high differential delay 0.0 ms Times over red diff delay 0 Times over yellow diff delay 0 LIP:add_lnk lnk_ack lnk_rej hello hel_ack lnk_rem rem_ack Rcv: 0 0 0 0 0 0 0 Xmt: 197 0 0 0 0 0 0 Logical interface ls-3/0/0:0.16 (Index 230) (SNMP ifIndex 954) Flags: Device-Down Point-To-Point SNMP-Traps Encapsulation: Multilink-FR-UNI-NNI Statistics Frames fps Bytes bps Bundle: Fragments: Input : 0 0 0 0 Output: 0 0 0 0 Packets: Input : 0 0 0 0 Output: 0 0 0 0 Protocol inet, MTU: 1500 Flags: None Addresses, Flags: Dest-route-down Is-Preferred Is-Primary Destination: 66.39.177.128/30, Local: 66.39.177.129 Logical interface ls-3/0/0:0.17 (Index 305) (SNMP ifIndex 955) Flags: Device-Down Point-To-Point SNMP-Traps Encapsulation: Multilink-FR-UNI-NNI Bandwidth: 625152kbps Statistics Frames fps Bytes bps Bundle: Fragments: Input : 0 0 0 0 Output: 0 0 0 0 Packets: Input : 0 0 0 0 Output: 0 0 0 0 Protocol inet, MTU: 1500 Flags: None Addresses, Flags: Dest-route-down Is-Preferred Is-Primary Destination: 10.100.100.0/30, Local: 10.100.100.1 > show interfaces t1-1/1/0:0 Physical interface: t1-1/1/0:0, Enabled, Physical link is Up Interface index: 444, SNMP ifIndex: 310 Description: Bendtel Test leg #1 Link-level type: Multilink-FR-UNI-NNI, MTU: 1518, Clocking: Internal, Speed: T1, Loopback: None, FCS: 16, Mode: C/Bit parity, Framing: ESF Device flags : Present Running Interface flags: Point-To-Point SNMP-Traps Internal: 0x4000 Link flags : None CoS queues : 4 supported, 4 in use Last flapped : 2010-08-19 18:42:37 GMT (21:24:58 ago) Input rate : 0 bps (0 pps) Output rate : 0 bps (0 pps) DS1 alarms : None DS3 alarms : None DS1 defects : None DS3 defects : None Logical interface t1-1/1/0:0.0 (Index 214) (SNMP ifIndex 429) Flags: Hardware-Down Point-To-Point SNMP-Traps Encapsulation: Multilink-FR-UNI-NNI Protocol mfr, Multilink bundle: ls-3/0/0:0, MTU: 0 Flags: None > show interfaces t1-1/0/0:19 Physical interface: t1-1/0/0:19, Enabled, Physical link is Up Interface index: 501, SNMP ifIndex: 211 Description: Bendtel Test leg #2 Link-level type: Multilink-FR-UNI-NNI, MTU: 1518, Clocking: Internal, Speed: T1, Loopback: None, FCS: 16, Mode: C/Bit parity, Framing: ESF Device flags : Present Running Interface flags: Point-To-Point SNMP-Traps Internal: 0x4000 Link flags : None CoS queues : 4 supported, 4 in use Last flapped : 2010-07-09 18:35:02 GMT (5w6d 21:32 ago) Input rate : 0 bps (0 pps) Output rate : 24 bps (0 pps) DS1 alarms : None DS3 alarms : None DS1 defects : None DS3 defects : None Logical interface t1-1/0/0:19.0 (Index 91) (SNMP ifIndex 625) Flags: Hardware-Down Point-To-Point SNMP-Traps Encapsulation: Multilink-FR-UNI-NNI Protocol mfr, Multilink bundle: ls-3/0/0:0, MTU: 0 Flags: None Here is the show chassis j...@b1-bend-re0> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis 20934 M20 ... FPC 3 REV 01 710-001292 AE7635 FPC PIC 0 REV 01 750-007924 HM0123 1x Link Service(32) ... For both t1s you can see that they show connected, but for some reason (that escapes me) the ls interface shows "Hardware-Down" Does this mean the Link services module is not turned up? To me it isn't clear. Any help would be great! Thanks -- Jim Lucas _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp