Hi, Don't know if this will work, but have you tried executing the "file copy" command from within the logical system by "set cli logical-system blah" ?
if this works, i don't know if you can install software from that location or not unfortunately. On Sat, Sep 17, 2011 at 8:14 AM, Chris Evans <chrisccnpsp...@gmail.com>wrote: > Juniper devices have out of band ethernet ports, but have the HUGE HUGE > downfall of being in the main routing table conflicting with every other > route. This limits it usage, however a work around is to put the FXP > interface into a logical system (on support devices). This has downfalls > too, but its better than nothing. Unfortunately Juniper hasn't gotten this > clue yes, every other vendor I've used recently has full vrf/logical system > support for their OOB interfaces keeping them out of the main routing > table. > > One main downfall I'm running into is that I cannot copy or install > software > using the FXP port as my source for traffic. Does anyone know of a command > that will allow me to select the logical system? The current commands don't > seem to allow routing instances or logical systems to be specified. > > Something like: file copy logical-system:MGMT:ftp://blah/blah.. > > Anyone have any other workarounds. Thanks! > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp