* Serge Vautour <sergevaut...@yahoo.ca> [2011-12-22 17:28]: > Hello, > > Have you tried building this up from a very simple setup that works > and adding complexity as you go? I've done something like this with > the "vlan-id all" before but not with the VLAN tag manipulations at > the same time.
Hi, yes I begun with a simple setup where I just connected two sites with one vlan on each site and "vlan-id none". The VLAN manipulation is the only thing that doesn't seem to work. > The first thing that looks odd to me is the input-vlan map. Why do > you need it? Swap on egress should be enough. Another thing I'm not > sure about is both sub-interfaces in the same site. I'd put them in > separate sites. I need the input-vlan-map to rewrite the vlan tag so that it is the same in the vpls instance on both sites. The subinterfaces are on the same L2 switch, why should I put them in different sites? What if I have 100 subinterfaces, I can't (or don't want to) make 100 sites for that on every PE. > Try making this work by using the same VLAN on both ends, then add > the VLAN manipulation. I've got something that looks almost exactly > the same as this in my lab and it works: If I have the same VLAN on both sites it works, but I don't have that in the production setup so that's not an option. :( Regards Sebastian -- New GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) Old GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp