Hi there I am pretty new to MPLS but what I'm trying to do is set up a L2 Tunnel between 2 Routers via VPLS. The idea is the customer can plug a TRUNK port at both ends and run whatever VLANS they want between them . Maybe there is a easier way to do it. There are LOTS of examples in LOTS of different places on how VPLS should be set up and all are slightly different. I cannot get any data thru the VPLS connection..
The set up is 2 Juniper Routers running OSPF between them and then BGP between the Loopbacks also running MPLS/LDP etc The Config is (the same on both ends basically) ge-0/0/7 { description "VPLS"; per-unit-scheduler; encapsulation ethernet-vpls; unit 0 { family vpls; } } VPLS-Customer { instance-type vpls; interface ge-0/0/7.0; route-distinguisher XXXXX:2000; (XXXXXX:1000 on other side).. (XXXX = the AS number) vrf-target target:XXXXX:100; protocols { vpls { site-range 10; no-tunnel-services; site router-2000 { site-identifier 5; (different on both sides) } } } } Debug.. # show vpls connections extensive Instance: VPLS-Customer Local site: router-2000 (5) Number of local interfaces: 1 Number of local interfaces up: 1 IRB interface present: no ge-0/0/7.0 lsi.1049090 6 Intf - vpls VPLS-Customer local site 5 remote site 6 Label-base Offset Size Range Preference 262153 1 8 8 100 connection-site Type St Time last up # Up trans 6 rmt Up Mar 2 11:32:17 2012 1 Remote PE: Y.Y.Y.Y, Negotiated control-word: No (Y.Y.Y.Y = Loopback of other router) Incoming label: 262158, Outgoing label: 262165 Local interface: lsi.1049090, Status: Up, Encapsulation: VPLS Description: Intf - vpls VPLS-Customer local site 5 remote site 6 Connection History: Mar 2 11:32:17 2012 status update timer Mar 2 11:32:17 2012 loc intf up lsi.1049090 Mar 2 11:32:17 2012 PE route changed Mar 2 11:32:17 2012 Out lbl Update 262165 Mar 2 11:32:17 2012 In lbl Update 262158 Mar 2 11:32:17 2012 loc intf down #show bgp summary instance VPLS-Customer Groups: 0 Peers: 0 Down peers: 0 Table Tot Paths Act Paths Suppressed History Damp State Pending VPLS.l2vpn.0 1 1 0 0 0 0 # show bgp summary. Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped... Y.Y.Y.Y 56030 6057 4657 0 0 1d 11:40:03 Establ (Y.Y.Y.Y = IP Address of other routers loopback) inet.0: 2/5156/2/0 inet.2: 0/0/0/0 bgp.l2vpn.0: 1/1/1/0 bgp.l3vpn.0: 0/0/0/0 VPLS-Customer.l2vpn.0: 1/1/1/0 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp