On Wed, Jun 11, 2014 at 10:01:37AM -0400, Chuck Anderson wrote: > On Tue, Jun 10, 2014 at 05:33:26PM +0100, Phil Mayers wrote: > > On 10/06/14 16:17, Chuck Anderson wrote: > > > > >Moving this same exact optic from the QFX5100 to an EX4200 running > > >11.4R8.5 it fails, so this seems to be an issue with how the optic is > > >programmed vs. the specific switch/router hardware, rather than > > >Junos-version specific: > > > > There are some suggestive entries in /var/log/messages now that I > > look; do you see anything there? > > I've since tried this optic on a different EX4200 running 12.3R4.6, > and then upgraded it to 13.2X50-D19.2. The result is the same as > 11.4R8.5 & 12.3R6.6. 11.4 didn't report anything interesting in > /var/log/messages, but 12.3 and 13.2 did.
I meant to ask, is there a PFE command that works on EX4200 for inspecting the optic? "show xfp" and "test xfp" are available on MX but not EX4200. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp