There is a line missing on MX side:
set interfaces lt-0/0/0.0 family ccc
Thanks
Alex
12/11/2014 16:51, Raphael Mazelier wrote:
Le 11/11/14 22:29, chip a écrit :
http://pastebin.com/YYfHk9M2
That should get you. *Caveats apply* but it does work =)
--chip
Thks you chip.
With your configuration I've made some progress.
Now I've got some arp replies on the CE connected to the EX :
2.1.1.5 > 2.1.1.6: ICMP echo request, id 26654, seq 11, length 64
17:42:39.031721 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has
2.1.1.5 tell 2.1.1.6, length 46
17:42:39.031731 ARP, Ethernet (len 6), IPv4 (len 4), Reply 2.1.1.5
is-at 78:2b:cb:28:2d:55, length 28
The lt mac is correctly learn on the CE.
But for one reason or another the mac address of the ce is not learn
on the mx80 side ?!
I'm just out of luck for this setup :(
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
