"Supports up to 200 Gpbs aggregate WAN bandwidth connectivity for the two MIC slots; the line card is oversubscribed in the ratio of 1.5:1."
https://www.juniper.net/documentation/en_US/junos12.1/topics/concept/chassis-mpc-100-gigabit-ethernet-mpc-overview.html Although it doesn't mention the 10x10GE card is supported, but I can't imagine it wouldn't be. Especially as you state you're already running it! Regards, Dave On 30 Nov 2014 23:23, "Robert Hass" <robh...@gmail.com> wrote: > Hi > I'm currently using MPC3E with one 10x10GE MICs in my MX480 and MX960 > routers. > > I need to add 10GE ports, if I will put second 10x10GE MIC in existing > MPC3E what will be oversubscribe rate ? I'm not sure but docs says about > 200Gbps for MPC3E then It should be wire-speed if docs claims full-duplex > or 1:2 if docs claims half-duplex. > > What is best solution (from price point of view) to have 16 x 10GE in 1 > slot on MX480/MX960 ? MPC3E + 10x10GE MICs or something different ? > > Rob > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp