I'd take a closer look at show interfaces. When a link is 1gig QFX calls it ge-. So you can have an ex-0/0/1 and a ge-0/0/1 but only one is active as I do not believe tri rate SFP+ is supported.
On Tuesday, November 3, 2015, ThienDuc Nguyen <thienduc.ngu...@zayo.com> wrote: > Hi > > I was trying to create a LACP bundle between two ports : one on a EX4300, > the other on a QFX5100. > Both link have their speed negotiated at 1GE (but the interface name on the > QFX is xe-, I can't force it to ge-, and their are no way to force the > speed on the QFX). > if I set the lacp speed to 1ge, the configuration can't commit because it > sees the QFX interface as a 10G interface... > > > Is their a special knob to activate it, or I need to create LACP on the > same device family ? (the version is 14.1X53-D30.3) > > Thanks, > > *Thien Duc Nguyen* > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net <javascript:;> > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp