Hello, Pretty sure QFX in 10G only, so if you want to achieve that, you'll have to use a uplink module to have 10G on 4300 side.
Vincent 2015-11-04 2:23 GMT+01:00 Michael Loftis <mlof...@wgops.com>: > I'd take a closer look at show interfaces. When a link is 1gig QFX calls it > ge-. So you can have an ex-0/0/1 and a ge-0/0/1 but only one is active as I > do not believe tri rate SFP+ is supported. > > On Tuesday, November 3, 2015, ThienDuc Nguyen <thienduc.ngu...@zayo.com> > wrote: > > > Hi > > > > I was trying to create a LACP bundle between two ports : one on a EX4300, > > the other on a QFX5100. > > Both link have their speed negotiated at 1GE (but the interface name on > the > > QFX is xe-, I can't force it to ge-, and their are no way to force the > > speed on the QFX). > > if I set the lacp speed to 1ge, the configuration can't commit because it > > sees the QFX interface as a 10G interface... > > > > > > Is their a special knob to activate it, or I need to create LACP on the > > same device family ? (the version is 14.1X53-D30.3) > > > > Thanks, > > > > *Thien Duc Nguyen* > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net <javascript:;> > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > -- > > "Genius might be described as a supreme capacity for getting its possessors > into trouble of all kinds." > -- Samuel Butler > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Vincent Clément +33 6 74 49 66 30 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp