Hey! I am using some QFX as route reflectors and would like to use BGP add-path feature. The documentation says that QFX is a supported platform[0] while the feature explorer says no QFX has support for that[1].
[0]: http://www.juniper.net/techpubs/en_US/junos16.1/topics/example/bgp-add-path.html [1]: https://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=3294&fn=For+internal+BGP+(IBGP),+advertise+multiple+paths+to+a+destination I have upgraded some QFX to 16.1R3 but there is no difference with 14.1X53-D40: add-path is an hidden command and only "receive" is available ("send" is not accepted): set protocols bgp group batman family inet unicast add-path send ... I have also tried on MX104 running 14.1R8. Feature explorer says this should be supported since 13.2R2. But I am in the exact same situation: add-path is a hidden command and only "receive" is available. I wonder if I am not missing something obvious. Any tip would be appreciated! -- The human race has one really effective weapon, and that is laughter. -- Mark Twain _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp