❦ 27 janvier 2017 20:08 +0300, Alexandre Snarskii <s...@snar.spb.ru> :
>> > No ideas on what can be wrong with your configuration :( >> > We run add-path on most MXes without any problems. Just tried with QFX >> > (not running bgp actually), add-path command is not hidden for me and >> > commit >> > check succeeds: >> >> Thanks for checking, that's helpful! >> >> In fact, I am using routing instances. Like you, I can get add-path >> send/receive outside a routing instance, but inside, add-path is >> hidden. I assumed this was independent of the routing instance >> (configured type virtual-router), so I didn't bother to check that. >> >> Does "set routing-instances rr1 protocols bgp group apath family inet >> unicast add-path ..." complete for you? > > Looks like routing-instances is the difference. Within routing-instance > add-path does not complete for me too, neither on QFX nor on MX. Thanks for the confirmation. That's a pity for a control-plane feature. I will rework the configuration to not use routing instances. -- If one cannot enjoy reading a book over and over again, there is no use in reading it at all. -- Oscar Wilde _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp