❦ 27 janvier 2017 18:34 +0300, Alexandre Snarskii <s...@snar.spb.ru> :
>> I have upgraded some QFX to 16.1R3 but there is no difference with >> 14.1X53-D40: add-path is an hidden command and only "receive" is >> available ("send" is not accepted): >> >> set protocols bgp group batman family inet unicast add-path send ... >> >> I have also tried on MX104 running 14.1R8. Feature explorer says this >> should be supported since 13.2R2. But I am in the exact same situation: >> add-path is a hidden command and only "receive" is available. >> >> I wonder if I am not missing something obvious. Any tip would be >> appreciated! > > No ideas on what can be wrong with your configuration :( > We run add-path on most MXes without any problems. Just tried with QFX > (not running bgp actually), add-path command is not hidden for me and commit > check succeeds: Thanks for checking, that's helpful! In fact, I am using routing instances. Like you, I can get add-path send/receive outside a routing instance, but inside, add-path is hidden. I assumed this was independent of the routing instance (configured type virtual-router), so I didn't bother to check that. Does "set routing-instances rr1 protocols bgp group apath family inet unicast add-path ..." complete for you? -- ROMEO: Courage, man; the hurt cannot be much. MERCUTIO: No, 'tis not so deep as a well, nor so wide as a church-door; but 'tis enough, 'twill serve. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp