Catalin Dominte wrote: > > > > > > I've encountered an odd problem with adding EX4200s (running 12.3R6.6) > > to Virtual Chassis with a nonprovisioned configuration file.
[dd] > > > > Looks fine, doesn't it? However, if I later poweroff the Backup switch > > (BM0217040019), the current Master switch (BM0213317561) goes into linecard > > (sic!) > > mode! And I lose ssh access to it. I can undo the disaster only from the > > serial console. > > > If you only have 2 members Yes, I do. > in a virtual chassis you could add: > > set virtual-chassis no-split-detection > > This will ensure that if both VC ports go down, the master routing engine > carries on working. Are you referring to "Scenario B" in https://kb.juniper.net/InfoCenter/index?page=content&id=KB13879 ? or a different case? -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN AS43859 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp