> > in a virtual chassis you could add: > > > > set virtual-chassis no-split-detection > > > > This will ensure that if both VC ports go down, the master routing > engine carries on working. > > Are you referring to "Scenario B" in > https://kb.juniper.net/InfoCenter/index?page=content&id=KB13879 ? > or a different case? >
I don't like to explain what others say but I think yes. It's been known behavior since always: in a two-member VC always disable split-detection. You can google for other threads on this in this list. It's always been kind of poorly documented. Last time I checked the docs, instead of just writing clearly that it must be disabled in two-members mode, they "don't recommend" it with some kind of hand-waving explanation that if you estimate that the backup RE failure probability is higher that a split-brain condition blah-blah-blah... Just disable split-detection, that's it :) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp