Hi guys, I have a lab set up on EVE-NG to test EVPN. I am running version 14.1R1.10.
When my local PE router learns a new MAC/IP binding it installs a host route in the IP VPN VRF with protocol type EVPN and a next hop of the VLAN’s IRB interface. This triggers the PE to transmit this host route to remote PEs that are members of the IP VPN via a VPN route advertisement. The remote PEs add this route to their VRF with protocol type BGP. The PE also advertises the MAC/IP binding via a MAC/IP Advertisement route to remote PEs. I see this type 2 route on the remote PEs. So far so good. From hereon things start to divert from expectation. I expected the remote PE to install a corresponding host route in its IP VPN VRF with protocol type EVPN. I only see the BGP route via IP VPN VRF in the VRF.inet.0 table. The MAC/IP route is supposed to be the preferred on but I don't even have it. Where could things be going wrong. RegardsEnoch _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp