Forget 14.1R1. Go with 18.1R3-S6 and try again. /Roger
On Wed, Jul 3, 2019 at 2:52 PM Enoch Nyatoti via juniper-nsp < juniper-nsp@puck.nether.net> wrote: > Hi guys, > I have a lab set up on EVE-NG to test EVPN. I am running version > 14.1R1.10. > > When my local PE router learns a new MAC/IP binding it installs a host > route in the IP VPN VRF with protocol type EVPN and a next hop of the > VLAN’s IRB interface. This triggers the PE to transmit this host route to > remote PEs that are members of the IP VPN via a VPN route advertisement. > The remote PEs add this route to their VRF with protocol type BGP. > The PE also advertises the MAC/IP binding via a MAC/IP Advertisement > route to remote PEs. I see this type 2 route on the remote PEs. So far so > good. > > From hereon things start to divert from expectation. I expected the remote > PE to install a corresponding host route in its IP VPN VRF with protocol > type EVPN. I only see the BGP route via IP VPN VRF in the VRF.inet.0 table. > The MAC/IP route is supposed to be the preferred on but I don't even have > it. > Where could things be going wrong. > RegardsEnoch > > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp