Hi, On 22.11.2019 19:48, Dave Bell wrote:
This is definitely not possible. You can’t jump from the data plane out of the fxp port. This is why things like jflow are only possible inband
The official statement is that it is neither possible nor supported. It was even highly marketed as separation in the earlier days. But i have seen a couple of occurrences (including a network crippling looping and therefore amplification of traffic e.g. back in the M5i days) where some traffic leaked from fxp0 to data plane and/or vice versa. Even if it would work you would not want it as the CP/DP link is pretty "slow" and already tasked with lots of other things which it struggles with at times ;) -- regards Tobias Heister _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
