Hi Mark, Oh yes ... exact same config and same setup and even same hw (mx104) works fine in other location giving consistent 1 ms without IP options and mostly 1-3 ms with IP options - but that is all fine. Going to RE is always non deterministic :)
Another interesting observation is that show command indicated services inline input traffic over 33 Mpps zero output while total coming to the box was at that time 1 Mpps .... Thx, R. On Mon, Mar 23, 2020 at 5:47 PM Mark Tinka <mark.ti...@seacom.mu> wrote: > > > On 23/Mar/20 17:37, Saku Ytti wrote: > > I'm not sure what you mean by 'PFE loops', this is single NPU > > fabricless platform, all ports are local. The only way to delay packet > > that long, is to send it to off-chip DRAM (delay buffer). > > > > But please update list once you figure it out. > > Just for giggles, Robert, are you able to test this with another Juniper > platform (even if it's the MX80)? > > Mark. > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp