Hi.
It does not work. according to the documentation it must be xe-
> Wiadomość napisana przez Jackson, William <william.jack...@gibtele.com> w
> dniu 09.10.2020, o godz. 13:42:
>
> Rename the interface ge-0/1/4
>
> admin@mx1> show interfaces xe-0/1/4
> Physical interface: xe-0/1/4, Enabled, Physical link is Up
> Interface index: 154, SNMP ifIndex: 530
> Description: TEST
> Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode,
> Speed: 10Gbps,
>
> On 09/10/2020, 13:16, "juniper-nsp on behalf of Łukasz Trąbiński"
> <juniper-nsp-boun...@puck.nether.net on behalf of luk...@trabinski.net> wrote:
>
> Hello
>
> In Lab I'm trying to set up 1G port on MX204.
>
> admin@mx1> show configuration interfaces xe-0/1/4
> description TEST;
> gigether-options {
> speed 1g;
> }
> unit 0 {
> family inet {
> address 192.168.1.138/30;
> }
> }
>
> admin@mx1> show configuration chassis fpc 0 pic 1 port 4
> speed 10g;
>
> Port is UP, but I can’t see any MAC address from remote side or I can’t
> ping remote side.
>
>
> admin@mx1> show interfaces xe-0/1/4
> Physical interface: xe-0/1/4, Enabled, Physical link is Up
> Interface index: 154, SNMP ifIndex: 530
> Description: TEST
> Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode, Speed:
> 10Gbps,
> BPDU Error: None, Loop Detect PDU Error: None, MAC-REWRITE Error: None,
> Loopback: None, Source filtering: Disabled, Flow control: Enabled,
> Speed Configuration: 1G
>
>
> Junos: 18.4R3-S5.4 but also tried on 18.4R3.3. I also setup
> auto-negotiation and fec options but without success.
>
> SFP:
> Xcvr 4 REV 01 740-011614 PJD2XXX SFP-LX10
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
