Hi Aaron,
It's not clear from your explanation where l2circuits with ospf are
connected and how they are related to this irb/vlan.
Do you really need a querier in this case? IIRC, querier is needed when
only hosts are present on LAN and a switch has to send igmp queries. In
your case, you have a router with irb interface that should work as igmp
querier by default. Not sure if it helps though.
Kind regards,
Andrey
Aaron Gould via juniper-nsp писал(а) 2024-01-31 14:54:
I'm having an issue where igmp snooping layer 2 querier breaks ospf in
other devices which are in l2circuits
Has anyone ever come across this issue, and have a work-around for it?
I have the following configured and devices in vlan 100 can join
multicast just fine. But there are other unrelated l2circuits that
carry traffic for devices in other vlans and inside this l2circuit is
ospf hellos that seem to be getting broken by this configuration
set interfaces irb unit 100 family inet address 10.100.4.1/27
set protocols ospf area 0.0.0.1 interface irb.100 passive
set protocols igmp interface irb.100 version 3
set protocols pim interface irb.100
set protocols igmp-snooping vlan vlan100 l2-querier source-address
10.100.4.1
Model: acx5048
Junos: 17.4R2-S11
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp