sadkra a écrit : > Hello Everyone, > > I just finished my first sch-pcb project in Kicad. > > I tried to output the pcb in Postscript format. When I looked > carefully at the Postscript file, I found that some of the pads are > missing &/or some pads are only half drawn in bottom-copper layer > while bottom-copper mask shows the complete pad-mask. > > I may add that gerber output of the same pcb is fine without any > problems. > > It will be of great help if someone throws any light on this. > Postscript output has a bug: after drawing oblong pads, some next drawings can be incorrectly drawn (bad size) This old bug is now solved (Postscript output will be Ok in next release, coming soon)
Can you confirm you have oblong pads on your board ? Jean-Pierre CHARRAS Maître de conférences Directeur d'études 2ieme année. Génie Electrique et Informatique Industrielle 2 Institut Universitaire de Technologie 1 de Grenoble BP 67, 38402 St Martin d'Heres Cedex Recherche : GIPSA-LIS - INPG 46, Avenue Félix Viallet 38031 Grenoble cedex