On 5/30/2016 12:00 PM, Frank Hamelly via KRnet wrote: > I want to use a split elevator on my KR and am wondering how to attach > the two halves in the middle to maintain structural integrity. I've > seen that Steve Anderson's KR used a split elevator but how were the > two sides fused? > > Also, thinking about using gap seals between the horizontal and > vertical stabs and the elevator/rudder. I have a 7/8" gap to fill > which seems like it would be much easier to use than building up the > bull nose on the leading edges while providing clear access to the > hinges. I'm using the rod-end bearing hinge design, with 5 hinges > instead of 3. > > Thanks in advance for the advice. > > Frank Hamelly > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
You can see my elevator horn, left and right sides bolt to the elevator spar(s) with one piece back up plate on rear side of spar(s)(not shown). Wood spar sawed in the middle. -- Gary Soli Deo Gloria -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160530/ebb133dd/attachment.html>
