Joe, Yes, that is exactly what I used . Vans RV6 nose scoop worked perfectly on the KR factory cowl. Cleco it in place and use epoxy and flow to bond it . Fits the standard K&N round filter on the carb. Cheers Chris Gardiner
Sent from my iPad > On Jun 28, 2016, at 4:13 PM, bjoenunley via KRnet <krnet at list.krnet.org> > wrote: > > > > Dear All, > Let's see if I can take care of some business.I have noticed that many of us > have an air scoop on the bottom of our cowlings. Has anyone tried the prefab > scoop that Vans sells for the RV6 with the 320 or 360 engine? It costs about > $80, which it is hard to build for less than that. > I have already built my version of Vans "FAB" air box intake with filter and > I feel that thier air scoop would work. What have you done that worked for > you? I built a mold that should fit over my air filter box but for $80 I > could save myself a lot of sanding. Check it out at Vans website to see if it > might work for you. > Like Mark said, I have scarffed a joint or two! > > Joe Nunley CW2 US Army RetiredBaker JROTC Instructor Baker Florida > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options