I have 75 hours on my KR-2S.  I use West System for all the wood joints 
and it shows no sign off falling apart.  Before I started to build I 
consulted an A&P who specializes restoring antique airplanes and has built 
or helped build at least 3 Pietenpols.  I did mix a little flox with the 
epoxy.
   Joe Weber
   937JW
----- Original Message ----- 
From: "Oscar Zuniga" <taildr...@hotmail.com>
To: <kr...@mylist.net>
Sent: Friday, April 08, 2005 10:58 AM
Subject: KR> west system


> Mark L. wrote-
>
>>This gives the impression that Aeropoxy is smelly.  I have to stick
>>my nose pretty close to it to smell it at all (without a respirator)
>
> Roger that!  I worked with Aeropoxy in my garage (connected to my house) 
> for
> several years, doing large layups, and never a whimper from my wife or
> daughters.  But just let me spray paint a metal fitting or open a can of
> solvent and I'd hear about it within 5 minutes.  Aeropoxy really is mild.
>
>>I don't think a pump can match that kind of accuracy,
>>especially after it gets a few years on it.
>
> The pumps used with West Systems are like the ketchup and mustard 
> dispensers
> at the burger place... you have one pump per container, pump down on each
> and get a shot of each.  The stroke on each pump (resin and hardner) are
> different, as are the plunger sizes, so you just pump equal pumps of each
> and get a perfect ratio every time.  It's not the metering type of pump 
> that
> draws from two containers into one outlet.
>
> I use the West System pumps for my Aeropoxy (with the proper size pumps to
> get the exact Aeropoxy ratio).  I love it.  You pump as much or as little 
> as
> you need, no weighing, no eyeballing.  If you're at the end of a layup and
> haven't mixed enough, you just walk over and pump some more and mix it 
> up...
> again, no mess and no weighing.  As someone else mentioned, you just need 
> to
> make sure to keep the containers full so you don't suck air into the pumps
> and not get a full stroke of the pump.  Picture of my pumps at
> http://flysquirrel.net/pumps01.jpg
>
> This is another thread that has come up repeatedly on this list ("will a
> plane built with West System fall apart?") and it's the old "less 
> filling...
> more taste" argument over and over again ;o)
>
> Oscar Zuniga
> San Antonio, TX
> mailto: taildr...@hotmail.com
> website at http://www.flysquirrel.net
>
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
> 


Reply via email to