OK - so I am placing the order now, but how much T-88 should I buy? According to the fly-kr site, the T-88 costs 26 bucks. The closest I can find to being correct is a pint for $22 from Aircraft Spruce. I assume that is the correct amount? Am I wrong?
Also - before I do it, I just wanted to make sure this is correct - Aircraft Spruce has two wood kits, but interestingly enough - the KR2S spruce kit is cheaper than the KR2 spruce kit. Is this a mistake? Nick Brennan nickdbren...@comcast.net ----- Original Message ----- From: <bdazzca...@aol.com> To: <kr...@mylist.net> Sent: Friday, February 16, 2007 10:07 AM Subject: Re: KR> Waiting for the plans... > Mr.Nick > > If you have a drill press or know anyone that does you can > buy the metal have it cut and you can drill it all out your self for way > cheaper. I bought the metal for the front and rear wing attachment from > AS&S for > less than $45. I bought the 1 1/2 inch strip for the front then bought a > 9'' by > 18" sheet and had the rears sheared off. My cut cost from a machine shop > was > $20. If your looking to save money I would deffinateely looking into > making your > own. If I was to take my parts and had them chromated professionally it > would > cause me $85 for anything I need chromated and painted. Just my opinion > not > that it counts for much. > > > David Swanson > bdazzca...@aol.com > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > Post photos, introductions, and For Sale items to <A > HREF=http://www.kr2forum.com/phpBB2/index.php > please see other KRnet info at http://www.krnet.org/info.html
