Hey Phil How do you do this when the bottom bolts in main and rear spar are not in alignment (as per the plans)?
If the wing pivots downwards on them they must align otherwise one or other will bind and strain the WAFs. John Martindale 29 Jane Circuit Toormina NSW 2452 AUSTRALIA ph: 61 2 6658 4767 (H) mob: 0403 432179 email: john_martind...@bigpond.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Phillip Matheson Sent: Saturday, 24 October 2009 7:32 AM To: KRnet Subject: Re: KR> gap between wings Then make some good gap covers like the ones you can see at: http://krbuilder.org/WingGapCovers/index.html --------------------------------------------------- I too left extra room as Dan did. I can remove the top WAF bolts, and lower the wing tip onto the ground or something soft, then remove the bottom bolts and lower the wing to the ground, very easily, but only do this at annual inspections. or if a problem my comes up. I too made covers similar to Dan's, very easy to do. Mine have 4 screws each holding them on. Phil Matheson SAAA Ch. 20 http://www.saaa20.org/ VH-PKR Australia EMAIL: phillipmathe...@bigpond.com KR Web Page: www.philskr2.50megs.com ------------------------------------------- Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.423 / Virus Database: 270.14.27/2453 - Release Date: 10/23/09 06:56:00
