of aero epoxie by the way, On Oct 13, 2011 9:34 AM, "Brian Coss" <briancossdul...@gmail.com> wrote:
> In laymans terms, if I was using one measured cup of resins, what would be > a good ratio for the hardener? in cup terms, 4 instance a little over a > quarter cup? > On Oct 11, 2011 7:31 AM, "Brian Coss" <briancossdul...@gmail.com> wrote: > >> Sorry,still learnin how to use a web site, I layd up the wings,is the >> racial the same for over the fiberglass? Thx >> On Oct 11, 2011 7:19 AM, <da...@windstream.net> wrote: >> >>> First, you need to remember to change the subject when you are changing >>> the subject. Your question had nothing to do with "Wingspan". I almost >>> deleted it because I have read enough about wingspan. >>> >>> The ratio for mixing AeroPoxy is 1 resin to .27 hardener. For sealing >>> the foam with the Micro mixture, put in enough Micro to have it pour about >>> like honey. If you get it too thick, it will start rolling up the foam if >>> you get that, just put in a little more epoxy and keep on going. >>> >>> ============= >>> Hi,i have a gal. Of aeropoxy& a quart of hardner&two pounds of micro >>> ballons, I have to finish my wings, what is the ratial for mixing them? >>> >>> >>> >>> _______________________________________ >>> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >>> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >>> please see other KRnet info at http://www.krnet.org/info.html >>> >>
