In laymen terms, get a scale. Guesstimating can get you killed, or at least make it difficult to work the mix. Scales - not just for drug dealers anymore.
-----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Brian Coss Sent: Thursday, October 13, 2011 9:35 AM To: KRnet Subject: Re: KR> AeroPoxy and Micro Mixture > In laymans terms, if I was using one measured cup of resins, what would be > a good ratio for the hardener? in cup terms, 4 instance a little over a > quarter cup? > On Oct 11, 2011 7:31 AM, "Brian Coss" <briancossdul...@gmail.com> wrote: > >>> First, you need to remember to change the subject when you are changing >>> the subject. Your question had nothing to do with "Wingspan". I almost >>> deleted it because I have read enough about wingspan. >>> >>> The ratio for mixing AeroPoxy is 1 resin to .27 hardener. For sealing >>> the foam with the Micro mixture, put in enough Micro to have it pour about >>> like honey. If you get it too thick, it will start rolling up the foam if >>> you get that, just put in a little more epoxy and keep on going. >>>
