I have used the Ellison for many years.  I finally scrounged an EFS-2 for my
VW and it worked very well.  I now have an EFS-3A on my Corvair and it works
as well.  The Ellison is a carb that you can install and run with only a
couple of well documented setup steps.  And, it works from then on without
any fooling around.

The Revflow and the AeroCarb are not even close to being on the same scale
as the Ellison.  I have had both and they require "fooling around".

Rotec does make an Ellison "like" carb.  I don't know if they have it in the
size needed for a VW however.  I dumped it after I found how ridiculously
crazy the throttle connection was set up.  On the Ellison, the cable is
fixed and only the inner cable moves to operate the slide.  On the Rotec,
the end of the cable is fixed and the rest of the entire cable moves to
operate the slide.  That is one of the most NUTZ things I have ever seen.
Other than that, I expect that it operates much like the Ellison.

I have wondered why VW engine people don't use a carb meant for an A65 or
A75 Continental?  They use the Marvel MAE-3 on the Corvairs.

See N64KR at http://KRBuilder.org - Then click on the pics 
See you at the 2012 - KR Gathering in Mt. Vernon, Il – MVN – 40th
Anniversary
There is a time for building and it is over.
Daniel R. Heath - Lexington, SC
http://www.krbuilder.org/MyUSA/



-----Original Message-----

what is your opinion of  the  ELLISON and AEROIJECTOR?

Reply via email to