On Thu, Jul 02, 2020 at 11:01:32AM +0800, Jingyi Wang wrote:
> Trigger PPIs by setting up a 10msec timer and test the latency.
>
> Signed-off-by: Jingyi Wang <wangjingy...@huawei.com>
> ---
> arm/micro-bench.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/arm/micro-bench.c b/arm/micro-bench.c
> index 4c962b7..6822084 100644
> --- a/arm/micro-bench.c
> +++ b/arm/micro-bench.c
> @@ -23,8 +23,13 @@
> #include <asm/gic-v3-its.h>
>
> #define NTIMES (1U << 16)
> +#define NTIMES_MINOR (1U << 8)
As mentioned in the previous patch, no need for this define, just put the
number in the table.
> #define MAX_NS (5 * 1000 * 1000 * 1000UL)
>
> +#define IRQ_VTIMER 27
As you can see in the timer test (arm/timer.c) we've been doing our best
not to hard code stuff like this. I'd prefer we don't start now. Actually,
since the timer irqs may come in handy for other tests I'll extract the
DT stuff from arm/timer.c and save those irqs at setup time. I'll send
a patch for that now, then this patch can use the new saved state.
> +#define ARCH_TIMER_CTL_ENABLE (1 << 0)
> +#define ARCH_TIMER_CTL_IMASK (1 << 1)
I'll put these defines somewhere common as well.
> +
> static u32 cntfrq;
>
> static volatile bool irq_ready, irq_received;
> @@ -33,9 +38,16 @@ static void (*write_eoir)(u32 irqstat);
>
> static void gic_irq_handler(struct pt_regs *regs)
> {
> + u32 irqstat = gic_read_iar();
> irq_ready = false;
> irq_received = true;
> - gic_write_eoir(gic_read_iar());
> + gic_write_eoir(irqstat);
> +
> + if (irqstat == IRQ_VTIMER) {
> + write_sysreg((ARCH_TIMER_CTL_IMASK | ARCH_TIMER_CTL_ENABLE),
> + cntv_ctl_el0);
> + isb();
> + }
> irq_ready = true;
> }
>
> @@ -189,6 +201,47 @@ static void lpi_exec(void)
> assert_msg(irq_received, "failed to receive LPI in time, but received
> %d successfully\n", received);
> }
>
> +static bool timer_prep(void)
> +{
> + static void *gic_isenabler;
> +
> + gic_enable_defaults();
> + install_irq_handler(EL1H_IRQ, gic_irq_handler);
> + local_irq_enable();
> +
> + gic_isenabler = gicv3_sgi_base() + GICR_ISENABLER0;
> + writel(1 << 27, gic_isenabler);
You should have used your define here.
> + write_sysreg(ARCH_TIMER_CTL_ENABLE, cntv_ctl_el0);
> + isb();
> +
> + gic_prep_common();
> + return true;
> +}
> +
> +static void timer_exec(void)
> +{
> + u64 before_timer;
> + u64 timer_10ms;
> + unsigned tries = 1 << 28;
> + static int received = 0;
> +
> + irq_received = false;
> +
> + before_timer = read_sysreg(cntvct_el0);
> + timer_10ms = cntfrq / 100;
> + write_sysreg(before_timer + timer_10ms, cntv_cval_el0);
> + write_sysreg(ARCH_TIMER_CTL_ENABLE, cntv_ctl_el0);
> + isb();
> +
> + while (!irq_received && tries--)
> + cpu_relax();
> +
> + if (irq_received)
> + ++received;
> +
> + assert_msg(irq_received, "failed to receive PPI in time, but received
> %d successfully\n", received);
> +}
> +
> static void hvc_exec(void)
> {
> asm volatile("mov w0, #0x4b000000; hvc #0" ::: "w0");
> @@ -236,6 +289,7 @@ static struct exit_test tests[] = {
> {"ipi", ipi_prep, ipi_exec, NTIMES,
> true},
> {"ipi_hw", ipi_hw_prep, ipi_exec, NTIMES,
> true},
> {"lpi", lpi_prep, lpi_exec, NTIMES,
> true},
> + {"timer_10ms", timer_prep, timer_exec,
> NTIMES_MINOR, true},
> };
>
> struct ns_time {
> --
> 2.19.1
>
>
Thanks,
drew
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
