Page 6.8 of the manual I sent you shows the rotary switch for diagnostics and reseting the system. You can reset it to defaults then try connecting a terminal interface via the RS232 port.
At 10:17 PM 10/26/2007, you wrote: >Thanks, I have the full manual. According to the manual, the flashing Power >light means that the system is not yet on-line. > >I do not know if it also indicates the hard drive is bad or something else >is wrong. The manuals you sent and the full manual I have basically say the >same thing, very generically, "flashing light = system not on-line" > >Scott > > >-----Original Message----- >From: D Resor [mailto:[EMAIL PROTECTED] >Sent: Friday, October 26, 2007 7:11 PM >To: Scott A. Keen >Subject: Re: KX-T: New to KX-TA824 and KX-TVS75 -- TVS75 blinking > >Here is the TVS75 installation guide. This covers the TVS 75 and TVS100. > > > >At 09:57 PM 10/26/2007, you wrote: > >I just bought a used KX-TA824 for my home which came with a used > >KX-TVS75 voice processor. > > > >The Power light on the KX-TVS75 is flashing, 7 quick blinks, then a > >long pause off, then repeat. > > > >What does this mean? Is the hard drive dead? What can be done to reset > >or fix this? > > > >Thanks, > > > >Scott > > > > > > > >_________________________________________________________________ > >KX-T Mailing list --- http://kxthelp.com/ Subscription changes: > >http://kxthelp.com/mailman/listinfo/kxt > >Donald R. Resor Jr. T. W. & T. C. Svc. Co. >http://www.hammondorganservice.com >Carillon Web Ring http://g.webring.com/hub?ring=thecarillonwebri >Organ Builders and Dealers Web Ring >http://u.webring.com/hub?ring=organbuildersand _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
