Hi, fellas.
Thanks for the suggestions.
I just took the cabinet apart and note that the card is in the lower
position. I was unable to get it out because of the two white plastic
stand-offs holding it in on two corners. Before trying to just yank those
out, I thought I'd ask if they are screwed in, or pushed in. I don't want to
damage the main board.
I tried rocking the card a little to make sure I was getting good
connections in the upper and lower sockets. No change. Still not seeing
Caller ID info.
Am I maybe on the wrong track? Am I supposed to configure the phones (7230's
and 7235) in some special way to display the Caller ID information, or is it
automatic that they should display it. I haven't been able to determine that
from the manuals.
--David
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
EDWARD FOUST JR
Sent: Tuesday, July 24, 2001 4:42 PM
To: David Kindred; [EMAIL PROTECTED]
Subject: KX-T: Re: Newbie: Caller ID Doesn't Work on TD1232
----- Original Message -----
From: "David Kindred" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 24, 2001 12:36 PM
Subject: KX-T: Newbie: Caller ID Doesn't Work on TD1232
> Hi, folks.
>
> I've just installed a used TD1232-1 in my home. It came with the 193
Caller
> ID card and a DISA card. For the life of me, I cannot figure out how to
get
> the Caller ID to display on the 7230's and 7235.
>
> I've enabled the CID for all CO's (406) and even made entries for my cell
> phone (110 and 111). When a call comes in, nothing is displayed on any of
> the phones.
>
> If anyone can offer some insight to a rank beginner, I'd really appreciate
> it. The fellow I bought the system from said everything was functional
> before he shipped it to me and I believe him.
>
> Much thanks!
>
> --David
>
> WHICH SLOT ARE YOU USING INSIDE CABINET. there are 2 slots one for
lines 1-4 and the second one for slots 5-8. this could be your problem
> also try moving it to the other slot 5-8. It may be bad. Had this happen
once before. dont forget to move the telephone lines also. (been there on
this one)
ed Foust, business telephone systems, inc.
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
