Gustavo Reyes wrote: >> -----Original Message----- >> From: Mikore.Li >> >> So, is your access point a Linux desktop configured to HostAP? >> > > Yes. With same laptop booting in XP, i can connect by wireless card. > Booting in SXDE, i can detect the Host AP with "wificonfig scan" but . > > >> What's the output of: #svcs -a |grep physical >> > > I left the laptop in my "home sweet home", but i know that "physical" is up > (online and default) and "nwam" is down. > > >> And, please try configuring wireless with wificonfig tool AFTER unplumb NIC >> interface. >> > > I made the test with NIC unplugged and "ifconfig rtl0 down", tonight I will > try with "unplumb". > > >> After that, please post the related output sections in console and >> /var/adm/messages. >> Thanks, >> Michael >> >> > > Okey. I will. > PD: How I can make debug to the attempt of connection?. > Gustavo,
I am not sure where the first failure comes, is it in connect step or in DHCP step? Basically, "dladm show-wifi" will give you current wifi status(connected or not). IP address can only be retrived when it is under "connected". Once connect/disconnect status changed, bcmndis reports "link up"/"link down" message into /var/adm/messages. For future connection debug, please try the simple senario configuring AP to non-wep and Open System authmode. For the DHCP IP retrive debug, please open another terminal, use "snoop -d bcmndis0" on solaris to check DHCP request/response, tcpdump under suse10 side can show this process as well. Thanks, Michael > Gustavo > > > This message posted from opensolaris.org > _______________________________________________ > laptop-discuss mailing list > laptop-discuss at opensolaris.org >
