Hi, Gustavo,
Are you sure the AP is in shared_key authmode? I think there is a bug in
inetmenu which defects connecting to AP using shared_key authmode. If
your profile 'GHRNET' is correct, what about the result:
#(the script to add driver)
#ifconfig bcmndis0 plumb
#wificonfig -i bcmndis0 connect GHRNET
If connect is ok, you will see:
wificonfig: connecting to profile 'GHRNET'
If it fail again, please double check AP setting, and disable the WEP
encryption shared_key authmode at AP side then do the connect with inetmenu.
Thanks,
Michael
Gustavo Reyes wrote:
> # svcs -a|grep physical
> disabled 23:36:14 svc:/etwork/physcal:nwam
> online 23:36:18 svc:/etwork/physcal:default
>
> bash-3.00# ifconfig -a
> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
> index 1
>
> inet 127.0.0.1 netmask ff000000
> bcmndis0: flags=201000802<BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 2
> inet 0.0.0.0 netmask 0
> ether 0:14:a5:e1:7e:8
> lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu
> 8252 index 1
> inet6 ::1/128
>
>
>
> bash-3.00# wificonfig scan
>
> essid bssid type encryption signallevel
>
> GHRWIFI 00:17:9a:0a:96:e9 access point wep 12
>
>
>
> bash-3.00# wificonfig showprofile GHRNET
> [GHRNET]
>
> essid=GHRWIFI
>
> encryption=wep
>
> wepkeyindex=1
>
> bssid=00:17:9a:0a:96:e9
>
> authmode=shared_key
>
> wepkey1=*****
>
> bash-3.00# wificonfig history
>
> essid bssid encryption last seen
>
> DIXS BAR 00:18:f8:6d:b0:b8 none Mon Jul 23 19:38:29 2007
>
> FT397458 00:14:a5:8d:ef:bd none Mon Jul 23 19:38:29 2007
>
> GHRWIFI 00:17:9a:0a:96:e9 wep Sat Jul 28 12:52:08 2007
>
> bash-3.00# inetmenu
>
> /usr/sbin/wificonfig: failed to connect to profile 'GHRWIFI'
>
> /usr/bin/inetmenu[63]: 990 Sistema colgado {**translate: systen hang,
> device disconnect**}
>
> bash-3.00# tail /var/adm/messages
>
> Aug 14 23:38:21 solaris-devx genunix: [ID 936769 kern.info] rsm0 is
> /pseudo/rsm at 0
>
> Aug 14 23:49:09 solaris-devx usba: [ID 912658 kern.info] USB 2.0 device
> (usb8ec,16) operating at hi speed (USB 2.x) on USB 2.0 root hub: storage at
> 1, scsa2usb0 at bus address 2
>
> Aug 14 23:49:09 solaris-devx usba: [ID 349649 kern.info] Kingston
> DataTraveler 2.0 0E30E461713059F2
>
> Aug 14 23:49:09 solaris-devx genunix: [ID 936769 kern.info] scsa2usb0 is /pci
> at 0,0/pci103c,30a5 at 1d,7/storage at 1
>
> Aug 14 23:49:09 solaris-devx genunix: [ID 408114 kern.info] /pci at
> 0,0/pci103c,30a5 at 1d,7/storage at 1 (scsa2usb0) online
>
> Aug 14 23:49:09 solaris-devx scsi: [ID 193665 kern.info] sd2 at scsa2usb0:
> target 0 lun 0
>
> Aug 14 23:49:09 solaris-devx genunix: [ID 936769 kern.info] sd2 is /pci at
> 0,0/pci103c,30a5 at 1d,7/storage at 1/disk at 0,0
>
> Aug 14 23:49:15 solaris-devx genunix: [ID 408114 kern.info] /pci at
> 0,0/pci103c,30a5 at 1d,7/storage at 1/disk at 0,0 (sd2) online
>
> Aug 14 23:49:15 solaris-devx genunix: [ID 314293 kern.info] device
> pciclass,030000 at 2(display#0) keeps up device sd at 0,0(disk#2), but the
> latter is not power managed
> Aug 15 00:06:43 solaris-devx /sbin/dhcpagent[1107]: [ID 116611 daemon.error]
> interface bcmndis0 has gone down
>
> Im sorry, i cant attach a file with this info.
>
> Gustavo
>
>
> This message posted from opensolaris.org
> _______________________________________________
> laptop-discuss mailing list
> laptop-discuss at opensolaris.org
>
