I cannot get my wireless interface to work with your
driver. I am running on an HP Pavillion DV1000 laptop
which has Windows XP and Solaris 10 Update 03 setup in
a multiboot environment with GRUB. The wireless
interface works fine on Windows/XP but not Solaris 10.
Here is some output from my Solaris 10:
# ifconfig iwi0 plumb
# ifconfig iwi0 dhcp
# ifconfig -a
lo0:
flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL>
mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=1004803<UP,BROADCAST,MULTICAST,DHCP,IPv4>
mtu 1500 index 2
inet 192.168.1.101 netmask ffffff00 broadcast
192.168.1.255
ether 0:c0:9f:77:c:b8
iwi0:
flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4>
mtu 1500 index 3
inet 192.168.1.104 netmask ffffff00 broadcast
192.168.1.255
ether 0:e:35:cf:a3:1a
lo0:
flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL>
mtu 8252 index 1
inet6 ::1/128
rtls0: flags=2000801<UP,MULTICAST,IPv6> mtu 1500 index
2
inet6 fe80::2c0:9fff:fe77:cb8/10
ether 0:c0:9f:77:c:b8
# wificonfig -i iwi0
parameter property
bssid read only
essid read/write
bsstype read/write
rates read/write
authmode read/write
encryption read/write
wepkeyindex read/write
signal read only
radio read/write
# wget
http://cvs.opensolaris.org/source/xref/usr/src/uts/i86pc/io/agpgart/agpgart.c
--12:44:04--
http://cvs.opensolaris.org/source/xref/usr/src/uts/i86pc/io/agpgart/agpgart.c
=> `agpgart.c'
Resolving cvs.opensolaris.org... 72.5.123.6
Connecting to cvs.opensolaris.org[72.5.123.6]:80... ^C
# ping 192.168.1.102
no answer from 192.168.1.102
# ### Re-connect Ethernet Cable
# ping 192.168.1.102
192.168.1.102 is alive
# wget
http://cvs.opensolaris.org/source/xref/usr/src/uts/i86pc/io/agpgart/agpgart.c
--12:48:28--
http://cvs.opensolaris.org/source/xref/usr/src/uts/i86pc/io/agpgart/agpgart.c
=> `agpgart.c'
Resolving cvs.opensolaris.org... 72.5.123.6
Connecting to cvs.opensolaris.org[72.5.123.6]:80...
connected.
Thanks
David
This message posted from opensolaris.org
