I have a T2000 Server with Solaris 10 installed.
The T2000 has: 4GB RAM memory; 4 CPU (that is 4 core); 2 HBA's SUN
Branded;
And one NIC card.
I have 2 internal disks that are h/w mirrored so if I run format I can
see
A 68GB logical disk. (see below the format output).
I am trying to find out the right steps/procedure in order to install
a
Guest Domain.
I have read the documentation in the LDOM Administration Guide however
I did not see all the steps in order to
Install/configure a Guest Domain.
Any help will be great.
Thanks.
Roberto Ballan
e-mail: x2ballan at southernco.com
=======================================================
gaxgpvw64xu# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec
136>
/pci at 780/pci at 0/pci at 9/scsi at 0/sd at 0,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c0t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c0t0d0s3 is currently mounted on /usr/local. Please see
umount(1M).
/dev/dsk/c0t0d0s4 is currently mounted on /export/home. Please see
umount(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 65533 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 7711 - 22167 15.00GB (14457/0/0)
31458432
1 swap wu 0 - 7710 8.00GB (7711/0/0)
16779136
2 backup wm 0 - 65532 68.00GB (65533/0/0)
142599808
3 usr wm 22168 - 26117 4.10GB (3950/0/0)
8595200
4 home wm 26118 - 30936 5.00GB (4819/0/0)
10486144
5 unassigned wm 0 0 (0/0/0)
0
6 unassigned wm 0 0 (0/0/0)
0
7 unassigned wm 0 0 (0/0/0)
0
partition>
