Ballan, Roberto wrote: > Hi Liam, > > Below is the ldm list -l after exporting a file as virtual disk to the > Guest Domain ldg1, please can you check if it looks fine ? > I want to make sure that it is correct before to run: net install on the > Guest Domain ldg1. >
Looks good to me. -- Liam > Thanks in advance for your help. > Regards. > Roberto Ballan > > =================================================== > > gaxgpvw64xu# ldm list -l > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > primary active -n-cv SP 4 4G 0.3% 4d 21h > 22m > > SOFTSTATE > Solaris running > > VCPU > VID PID UTIL STRAND > 0 0 0.5% 100% > 1 1 0.2% 100% > 2 2 0.4% 100% > 3 3 0.3% 100% > > MAU > CPUSET > (0, 1, 2, 3) > > MEMORY > RA PA SIZE > 0x8000000 0x8000000 4G > > VARIABLES > boot-device=/pci at 780/pci at 0/pci at 9/scsi at 0/disk at 0,0:a disk net > > IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > pci at 7c0 bus_b > > VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 vol1 > /export/home/guestdir/guest1disk.img > > VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > > VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:f8:d4:4b e1000g0 switch at 0 prog,promisc > > VCONS > NAME SERVICE PORT > SP > > ------------------------------------------------------------------------ > ------ > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > ldg1 active -t--- 5000 4 512M 25% 26s > > SOFTSTATE > Openboot initializing > > VCPU > VID PID UTIL STRAND > 0 4 100% 100% > 1 5 0.0% 100% > 2 6 0.0% 100% > 3 7 0.0% 100% > > MEMORY > RA PA SIZE > 0x8000000 0x108000000 512M > > VARIABLES > auto-boot?=true > boot-device=vdisk > > NETWORK > NAME SERVICE DEVICE MAC > vnet1 primary-vsw0 at primary network at 0 > 00:14:4f:fa:1d:f6 > > DISK > NAME VOLUME TOUT DEVICE SERVER > vdisk1 vol1 at primary-vds0 disk at 0 primary > > VCONS > NAME SERVICE PORT > ldg1 primary-vcc0 at primary 5000 >
