[ldoms-discuss] Install/setting LDOM Guest Domains

[Ballan, Roberto]

Hi Liam,

  Now I can go ahead and run:  net install (Jumpstart method to install
Sun Solaris 10), is this correct ?

 Thanks.
 Roberto Ballan


-----Original Message-----
From: Liam.Merwick at Sun.COM [mailto:liam.merw...@sun.com] 
Sent: Tuesday, February 05, 2008 11:50 AM
To: Ballan, Roberto
Cc: ldoms-discuss at opensolaris.org
Subject: Re: [ldoms-discuss] Install/setting LDOM Guest Domains

Ballan, Roberto wrote:
> Hi Liam,
> 
>   Below is the ldm list -l after exporting a file as virtual disk to
the
> Guest Domain ldg1, please can you check if it looks fine ?
> I want to make sure that it is correct before to run: net install on
the
> Guest Domain ldg1.
> 

Looks good to me.

-- Liam


>   Thanks in advance for your help.
>   Regards.
>   Roberto Ballan
> 
> ===================================================
> 
> gaxgpvw64xu# ldm list -l
> NAME             STATE    FLAGS   CONS    VCPU  MEMORY   UTIL  UPTIME
> primary          active   -n-cv   SP      4     4G       0.3%  4d 21h
> 22m
> 
> SOFTSTATE
> Solaris running
> 
> VCPU
>     VID    PID    UTIL STRAND
>     0      0      0.5%   100%
>     1      1      0.2%   100%
>     2      2      0.4%   100%
>     3      3      0.3%   100%
> 
> MAU
>     CPUSET
>     (0, 1, 2, 3)
> 
> MEMORY
>     RA               PA               SIZE
>     0x8000000        0x8000000        4G
> 
> VARIABLES
>     boot-device=/pci at 780/pci at 0/pci at 9/scsi at 0/disk at 0,0:a disk net
> 
> IO
>     DEVICE           PSEUDONYM        OPTIONS
>     pci at 780          bus_a
>     pci at 7c0          bus_b
> 
> VDS
>     NAME             VOLUME         OPTIONS          DEVICE
>     primary-vds0     vol1
> /export/home/guestdir/guest1disk.img
> 
> VCC
>     NAME             PORT-RANGE
>     primary-vcc0     5000-5100
> 
> VSW
>     NAME             MAC               NET-DEV   DEVICE     MODE
>     primary-vsw0     00:14:4f:f8:d4:4b e1000g0   switch at 0
prog,promisc
> 
> VCONS
>     NAME             SERVICE                     PORT
>     SP
> 
>
------------------------------------------------------------------------
> ------
> NAME             STATE    FLAGS   CONS    VCPU  MEMORY   UTIL  UPTIME
> ldg1             active   -t---   5000    4     512M      25%  26s
> 
> SOFTSTATE
> Openboot initializing
> 
> VCPU
>     VID    PID    UTIL STRAND
>     0      4      100%   100%
>     1      5      0.0%   100%
>     2      6      0.0%   100%
>     3      7      0.0%   100%
> 
> MEMORY
>     RA               PA               SIZE
>     0x8000000        0x108000000      512M
> 
> VARIABLES
>     auto-boot?=true
>     boot-device=vdisk
> 
> NETWORK
>     NAME             SERVICE                     DEVICE     MAC
>     vnet1            primary-vsw0 at primary        network at 0
> 00:14:4f:fa:1d:f6
> 
> DISK
>     NAME             VOLUME                      TOUT DEVICE  SERVER
>     vdisk1           vol1 at primary-vds0                disk at 0  primary
> 
> VCONS
>     NAME             SERVICE                     PORT
>     ldg1             primary-vcc0 at primary        5000
>