Nathan, When booting from a CD, the only floppy formats supported are 1.44 and 2.88.
Check which format Oxygen-CD is using and correct your config file. -----Original Message----- From: Angelacos, Nathan [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 18, 2001 9:33 PM To: LEAF Development Subject: RE: [Leaf-devel] Oxygen Updates David Douthitt wrote: >Also, the Oxygen Bootable CDROM has been updated, but the 'largenet' >configuration is still SegFaulting at the end. Please help me find >out why.... It's very puzzling, as there is plenty of RAMdisk space >and other configurations work fine. In case it is any help to anyone else, when I booted with the CD and just hit enter (default is linux), linuxrc ran until the section *** ALMOST ALL OTHER PARAMETERS WILL BE IGNORED! *** LINUXRC: couldn't mount /dev/fd0u1680 with fs msdos! LINUXRC: error: not configuration LINUXRC: stopping system... and it stopped. From an older post of Dave's I tried this at the initial boot prompt: boot: linux conf=testcd.cfg and boot: linux conf=cdrom.cfg and LINUXRC goes through, complains about not finding /dev/fd0u1680 several times, then loads the packages and runs. I'm sure I'm abusing the boot prompt and should be entering other things as well, but this was the minimum I needed to get going. I'm sure I missed something along the line, but the Dec 17 .iso is the first one that's worked for me. Looking forward to testing further. Dave, is the "linux conf=largenet.cfg" the way I'm supposed to test the largenet.cfg? _______________________________________________ Leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel
<<application/ms-tnef>>