Did see and follow that to start with. Which module to use for which hardware is an issue. Which is why I tried all combinations. Will keep trying though.
Mohan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Matt Schalit Sent: Monday, February 17, 2003 2:47 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [Leaf-hardware] Usb help needed see the devel-list and the message subject Bering USB example and question from February 1, 2003. I would only guess that you might try 2.4.20 as the mini-HOWTO does. If nothing else, it's along the lines of fixing segfaults; though I realize you said you got all the modules from the same tree. Good luck, matt S Mohan wrote: > I'm using a Nagasaki MS2300LLL box - Openbrick. I'm trying to load up > driver modules for a USB pen drive and am running into problems. > Bering stable 1.0 2.4.18 kernel. Modules taken from same tree. > > Insmod usbcore - goes thro' fine. > Insmod usb-uhci - gives an error. Module has loaded and is > initialising forever. Cannot rmmod also. Error says init_module not > supported. > > I also tried insmod uhci, insmod usb-ohci and these two give > segmentation faults. Does any one alse have any experience on this > that I can benefit from? > > Bye > Mohan > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Leaf-hardware mailing list [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-hardware > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Leaf-hardware mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-hardware ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Leaf-hardware mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-hardware
