Hi All,
I am having a similar problem with Cipe. It loads up OK and gets a PID, but
whenever I try and ping the remote peer I get segmentation faults and "Aiie,
killing interrupt handler messages" followed by kernel panics. When I
reboot I also get Null pointer kernal dereference when cipcb0 is closing.
I have used the same eigerstein beta release kernel 2.2.19 that is listed as
tested with the ciped-1 release. Also I have made a very minimalist boot
with just etc, log, lcocals, modules and ciped-1. Removed weblet etc. I
removed all the ip_masq modules also. My system is using the ne2k-pci module
for network which seems to be working ok by itself, dhcp was working ok etc.
I suspect that there is some conflict with something else, but I wouldn't
mind if anyone has a few tips about where to start looking.
john
>I found this problem, then I loaded the module from the /etc/modules
>I read the CIPE faq and found that my error message could be caused
>by a mismatched module so I changed my kernel to use Charles's
>normal ide without IPSEC. 2.2.19 kernel
>
>I checked my scripts and kept trying
>but linux crashed more than once ( segmentation fault then
>the whole machine crashed) ( message: "trying to kill the idle task" or
>something like that)
>
>
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
