I've tried to run both Eigerstein and Dachstein unsuccessfully. I have a PII 233 MMX processor on a generic motherboard with 32 Meg of RAM and 2 Linksys LNE 100tx Nics.
I must be overlooking something. I first attempted to run Eiger. Apparently the tulip driver wasn't current enough and my NICs weren't recognized. I was getting the message that eth0 did not exist. Then I tried Dachstein. I got the following message: "No subnet declaration for 'eth1' (0.0.0.0). Please write a subnet declaration in your dhcpd.conf file for the network segment to which eht1 is attached." Apparently that NIC was not being detected (at least that is what I thought I saw scrolling past as it was loading). I checked the dhcpd.conf file as well as the /etc/init.d/dhcpcd. The declaration seemed to be made?! I even tried using a different, older, Linksys card. I then attempted Oxygen. My machine seemed to register some key stroke input that made it difficult to even get it to boot. Then I did not understand how to configure my machine (yes I am a Linux newbie), but again there seemed to be a problem with dhcp and my NICs. I am certain I must be overlooking something, but it is unclear to me what that might be. I've made several attempts to get LEAF working and I am 0 for 4. Is there some missing step to getting dhcp running? Is there something funky about trying to use 2 of the same brand of network card? Can anyone offer some suggestions as to what I may be doing wrong or if I am overlooking something? _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
