Charles, this from Donald Becker
>That's an ADMtek Comet chip. Here is the entry in tulip.c
> { "Accton EN1217/EN2242 (ADMtek Comet)", { 0x12161113, 0xffffffff },
> TULIP_IOTYPE, TULIP_SIZE1, COMET },
> You should use
> http://www.scyld.com/network/tulip.html
> ftp://www.scyld.com/pub/network/tulip.c
The Dachstein tulip driver doesn't appear to support this.
I got the most recent tulip driver from the Becker website (above).
I will attempt to build the tulip module I need from this.
Then send it to you, if you're interested.
I would appreciate a little advice, if you have a moment.
My computer is running RedHat 7.2 ( 2.4.7)
My plan is:
Dowload 2.2.16 from kernel.org.
Put it in /usr/src/linux-2.2.16.
make links from /usr/include/linux and /usr/include/asm into the .16 dirs.
Run kgcc on tulip.c
If that doesn't work, load RH 6.2 (2.2.14) on a 486 box I have
and repeat the above.
Should one of those produce a module for 2.2.16?
Thanx very much, phil.
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user